Quantcast
Channel: Phil's Workbench
Viewing all 4473 articles
Browse latest View live

Saturday Film Club: Savannahlander

$
0
0


The Savannahlander is an Australian tourist train that takes its passengers out into the bush. Rolling stock is fantastic looking 1960s railcars with more than a hint of Buster Crabbe Flash Gordon about them.

Because this is for tourists, there has a be a safety briefing and it's entertainingly Australian, especially right at the end...

Obviously you can't see much of the train in the safety video, so here's it running.



Chiltern Model Railway show 2018

$
0
0
Waterfront

Didn't this use to be St Albans show?

Yes, it did, but then they made the move to Stevenage to a leisure centre and theatre complex. Result - instead of the horribly cramped and difficult to navigate accommodation of past years, this time we have two large, rectangular halls.

The organisers have taken the advantage of this to fill them with lots of high-quality layouts, several of which would have been too large for the old place.

Getting in a bit odd as the ticket booth is upstairs and show on the ground floor. The last vestiges of the panto were evident with Dick Whittington themed cafe names still pinned up as the show finishes its run.

Lakeside

Sorry to report that this was another show with a lot of chatting which I know doesn't make for an exciting report. I did take a few photos and the excellent lighting means most of them came out OK.

Highlights had to be listening to the Gauge 3 models run. Not the sound units in the electric locos, but the rumble of heavy rolling stock over track joints - absolutely perfect. You can try in smaller scales, but never really achieve that deep thunk so redolent of old train journeys. I don't miss it on a modern train, but there is something very reassuring about the sound on a slow service.

Aerial and Pickles

The show attracts layouts from abroad, including this slightly mad, but apparently prototypical one with a working cableway. Not only working, but very well modelled too. It's easy to do this as a gimmick, but much harder to do a quality job.

Sutton Wharf

If there has to be a "layout I'd like to built", it's going to be Sutton Wharf. I love the large scale and the atmospheric colouring and building finishes. Over the years, I've come to appreciate narrow gauge oddities and one day will build something along these lines myself I hope.

Tea and pasteries stand

One change to show reports for a while will be the lack of cake reviews I'm afraid. A new leaf has been turned over with some healthy eating on the agenda and for the moment that means I don't get cake. I can report the tea was lovely and the chicken in a basket perfectly fine. Not pricey either. To ben honest, the cake slooked nice, but small, so I didn't miss them too much...


Miss-chief at speed

$
0
0
Model speedboat

Adding a propeller makes a huge different to my little speedboat!

Miss-chief still isn't the fastest model on the water, but she works well enough for me and is a really enjoyable sail. Even in cross-winds, the top seems to stay put and no water found its way inside. 

I'm not completely finished though. The rudder is the wrong shade of red, a brass prop has been bought to replace the plastic one, and I have some vintage design advertising logos for extra decoration. 

Watch this space.

Brass prop miss-take

$
0
0
Miss-Chief at speed

A little more on-water action for Miss-Cheif but with a slight difference, I'd managed to buy a brass 2-blade propeller for her. 

Conventional wisdom is the brass props are better than plastic ones. They certainly look nice, but as soon as the boat was on the water, I knew I'd made a mistake. She still moved, but had lost at least a quarter of her top speed. 

The brass prop may be pretty, but the shape of the plastic one shifts more water and that's what matters. Fortunately, I'd taken both and swapping is a matter of only a minutes work. After that, we were off again.

I still think there is room for tuning, but sailed at top speed for well over 15 minutes and enjoyed myself so no complaints. 


Another addition is a set of advertising stickers. I know these boats wouldn't be thick with logos, but a BP shield (I've always thought it funny to use this as they are my Dad's initials) and Champion spark plugs on the side. 

They just add a bit of life to the cockpit, and while it may not be fast, this boat is pretty. 

Warehouse Wednesday: Holt station sign

$
0
0
Holt

From the North Norfolk Railway, a rather nice station sign. If we have stations, we need signs and this is fairly easy one to model. 

Those square posts are a lot easier to deal with then the GWR round version. The whole job could be done in plastic strip. How much detail you go to on the fancy bits would depend on your eyesight, dedication, and scale. I'd probably cheat a little in 4mm but we're only talking layers of microstrip, and this is one of those details the eye of any viewer will settle on.

Cab detail

$
0
0
The very open cab of "Dotti" caused me much head scratching. As supplied, you get a bench seat and a big wheel. It looks like a steering wheel, but when I posted a question on Facebook asking what should be in the cab, I got this very helpful reply:

Try looking up some of the German manufacturers like O&K and Jung, they tended to have a wheel controlling both clutch and direction and a single lever for the brake. There was usually a small lever for the throttle somewhere on the bulkhead

I was also sent a link to this website where I spent far too much modelling time looking at little diesels.

Anyway, a lever appears to hang on the back of the gearbox on a lot of locos. Nothing to be seen here, so something carved from plastic appearing to poke through from under the seat. 

Talking of seats, I felt my driver needed something more than a bench to sit on so fabricated something very basic from more plastic.  Finally, I spotted that locos driven sidesaddle sometimes had a strip under the drivers feet, presumably to give him something to brace against to avoid sliding out of the seat on curves.

Book Review: A Little Saw by Andy Clark

$
0
0
Publisher: Andy Clark

ISBN: 978-1976814907

A5 softback

63 Pages

£3.99

Andy Clark runs the popular Workshop Shed blog. This first foray into print publishing is a spin off from his tales of making things on-line and part of the effort to encourage more people to have a go at making things with their hands.

Saws are one of those tools we all use, but frequently don't understand. Why is there such a bewildering array on say at our local DIY shed? Why do we need more than one? Don't they all do the same job?

They don't, and in this book, Andy explains the difference between 10 different saws and the jobs they are best suited for.

I learned a little about teeth, especially those for garden saws, but then the book isn't really aimed at me. It's perfect for anyone looking to do more woodwork but struggling a little. Both young and old will appreciate the larger than normal text and diagrams for each tool.

OK, at 63 pages, it's not going to take you long to read through but then that's not the point. We're not talking about an academic tombe, it's a handy guide to be kept on the shelf for when you are faced with a task requiring a saw. At this point, Andy takes you by the hand and points you in the right direction.

Buy A Little Saw from Amazon

Saturday Film Club: Tiny Wimborne

$
0
0


I'm not sure what I like most about this weeks film. Is it the wonderful commentary? 

The archive (now, not then) shots of the full-size Wimborne? 

That more than 350 photographs taken to ensure complete accuracy (this was the days of film remember, we do that in a weekend now) 

or that after a quick bit of web searching, it turns out that Wimborne Model Town still exists.


London Model Engineering Exhibition 2018

$
0
0


My annual practise run, driving to Alexandra Palace. I'm going to have to do it in a couple of months and on a Friday, so it's good to have a go in the somewhat lighter traffic found on Sunday morning nice and early. So early that we got in the car park by 9 - right on top of the hill.

Inside the show, it was the usual eclectic mix of disciplines from plastic kits and Lego to great big lumps of metal. Quite how you summon up the courage to start work on a 7 1/4 "Big Boy" that will be 17 feet long is a mystery, but I'm sure it's going to look great when it's done, at least judging from the parts on show anyway.

Little Lister loco

I think my favourite loco was this little Lister. I could just imagine pottering around a miniature line on it. And there is a Lister D awaiting restoration under the workbench in the garage. But no...

Barrett steam models J65

Obviously, I spent quite a lot of time ogling the G, G1 and 16mm layouts. They are always very popular - that combination of movement and live steam always draws a crowd.


Double Deck Tramcar

With my Dad in tow, we also spotted one of his "maturing" projects, an Ochre tram kit. You don't see many of these built up, but this one looked lovely and has inspired him to take another look at the Portuguese tram kit he was building before moving on to the LCC car.

SAC Burrell

Following their appearance in EiM, it was great to catch up with the Steam Apprentice Club and take a look at their fantastic Burrell as seen on the front cover of the magazine. Lovely friendly group - if you are under 21 and fancy getting involved, they will welcome you with open arms.

This wasn't an expensive show though. I picked up some steam oil and an gas tank filler from Polly Model Engineering but apart from lunch (£10ish a head inc. drinks), my wallet survived the trip largely unscathed. That might have been me remembering that I haven't even started the "quick to build" kit I came back with last year though...





Time for the big guns?

$
0
0
The biggest surprise last week in model railway land was the announcement of the "Boche Buster" rail mounted gun from Oxford Rail. I was the the London Toy Fair and managed to handle the 3D printed sample - it's a beast of a model that is going to be very popular with anyone who appreciates something different to run on their layout. At £50 a go, that will be a huge number of people I suspect.

(As an aside, the catalogue number OR76BOOM01 is brilliant. Top marks for whoever came up with that one) 

Sadly, the gun is non-operational so there's no point in stocking up with ammunition with name of your nemesis on popular web forums inscribed on the outside.

Triang R216 Tactical Rocket launcher

For operational model warfair, you'll need to track down a Triang R216 Tactical Rocket launcher. Launched (geddit?) in 1957. Available with several different colour rockets and launch devices, it's a proper collectible, but available for surprisingly small amounts of money. This one only cost me a fiver a few weeks ago from Footplate Models in Kidderminster. 

The rocket sails several feet when fired. I suspect that the spring has weakened over time and when new it would be a pretty potent weapon against your kid sister or other enemies. 

I'm not one for war toys at all, but I can't help liking this brightly coloured accessory. Perhaps back in those days, people didn't take the hobby so seriously? Perhaps the "Boche Buster" will show that many still don't, they just want to have fun. 

Whitemetal castings on

$
0
0

Finally, the good bit. Half an hour spent with superglue sticking the whitemetal castings in place. Suddenly the loco takes a great, big step forward.

Apart from a tiny bit of cleaning up, the castings went on as supplied. I've drilled the centre of the air vent so I can pin it down with a length of plastic rod that goes through the top of the bonnet.Either that, or I'm sure I'd have knocked it off in the future.

The exhaust looked a bit unsupported but a length of wire added another support.

The radiator is filled with Albion Alloys mesh cut to size with scissors. Since the bonnet is off-centre, it looks a bit odd, but in a properly narrow gauge way.

Next up, a quick wash and then primer.


Warehouse Wednesday: Bristol dockside

$
0
0
Bristol Dockside

Years ago, I found myself on a course for work which entailed stopping over in Bristol. My hotel wasn't far from the historic docks so obviously, I took a stroll in the evening and shot a few frames of film. 

Even though the docks are now a museum, the basic buildings haven't changed and are as square, and therefore modelable, as ever. The modular design would make them very adaptable for any size of layout. 

Add to this some embedded trackwork looking fabulous after the rain, and this would make a cracking scene in miniature once backdated about 50 years.

Meeting a hero in the Vintage BRM

$
0
0

March 2018 sees a BRM with a vintage feel. Spotting a couple of Dave Rowe's early layouts at the GCR show started us off on trail of the man himself, which lead to bringing together some of the finest models from the past.



My contribution is a retrospective covering Dave and Shirley's modelling career trying to take in all the layouts they built as well as a few funny stories along the way. With such a body of work, it was difficult to fit everything in to the allotted, and generous, space available.

Meeting the pair for a chat and to look at some of the automata Dave has built over the years, was a pleasure. It's always difficult as you could be horribly disappointed, but Andy and I enjoyed a day with one of the most enthusiastic people I've met. Model making keeps you young!


Didsbury Green goes green this month with loads of electrostatic grass and some trees appearing on the layout. I like this stage, it's when the layout really comes to life, and you get to soften the edges on some of the bodges along the way.

DVD watchers will find Andy and I finishing our trip to Pendon with a look at the Madder Valley Railway and discussion on planning a scene to make it interesting to a viewer.

Digital magazine readers get even more this time - I take you around the Bachmann trade day, one of those events you can't normally visit. There are products to look and an interviews to watch.

Talking over interviews, I have a look at Triang TT, spending the entire time calling my interviewee "Bob" because I mixed him up with someone else. Our electronic version of the mag is growing and if you are unsure whether it's worth a go, this is the issue to download to find out and it's not just me you find in there.

Buy a digital issue of March 2018 BRM

Mr Starboard

$
0
0


Since this is an IP Engineering kit, I thought I ought to use one of their figures.

Obviously, Mr Starboard is perfect since he's looking the right way, I have a Mr Port for another project. Slightly cartoony in the manner of most garden scale people, I don't think the camera has been kind. Painted up, he looks rather nice and the eyes don't look so weird.

Paint is mostly Humbrol with Lifecolor flesh tones. All the colours were applied and then dry-brushed with a lighter shade. Once dry, a quick and thin coat of Games Workshop inks (black and brown) took care of the shadows.

Saturday Film club: Making track

$
0
0


I'm not a big fan of long videos for the Film Club, but even at just under 14 minutes, I found this one fascinating. 

We are looking at a very much pre-health and safety world - lots of dust and no masks and someone working in the casting shop who looks about 12 years old. 

It makes you think though - all those cast iron chairs, they had to come from somewhere. Many thousands of them, all cast by hand. Then drilled and assembled much like model track. 

There's an interesting Sentinel shunter in the yard too. Nice signwriting and extensions to the bunker not unlike a 1970s Jaguar car. Presumably this was to hold more coal but you wonder why if it works in a yard.


Toy Fair 2018

$
0
0
Foam dragon

While my visit to the London Toy Fair a couple of weeks ago was primarily to look at model railway items, I couldn't resist pointing my camera at a few other things that caught my eye.

Wooden safes

Laser cut wooden safes from UGEARS.

Push along truck

A very 50s looking push along truck.

Aren't we cute?

Awwww - Cute!

Archetectural toy

A toy for those who want their child to grow up to be a town planner.

Wooden Lollypops

No calorie wooden lollypops from Le Toy Van

Superheros

Is it wrong that I think wandering around in costume could be quite fun?

Review: The Biggest Little Railway in the World

$
0
0


Caveat: I have met the producer of  "The Biggest Little Railway in the World"a couple of times and read two accounts from those who took part, one of which will appear in the March issue of Garden Rail. I do, therefore, have some behind the scenes knowledge.

Basically - I liked it.

The first thing to realise is we are watching a TV programme. One designed for "normal" people. One that has to entertain enough to attract advertisers to pay for it all.

Because of this, the five episodes have to feature human interest stories, we need to care about the participants, and plenty of action. If the who shebang goes without a hitch then it's going to be boring. It didn't. It wasn't.

This requires a certain amount of TV trickery. The producers had surveyed the route (or at least virtually all of it) before filming and they knew where the difficult bits were going to be. In this case, that's where the special build teams found themselves, and the people on that team got a lot more screen time than those just laying mile after mile of plastic track in the middle of nowhere.

The special designs have been stunning. The 60-metre long viaduct and trestle bridge are both amazing structures. One suspects that the team were given reasonably well worked out "suggestions" so that the right tools and materials were to hand. This took place in deepest Scotland so any bright spark suggesting that the solution would involve carbon fibre and nanotubes would be quietly taken to one side, pointed at a van full of wood and some woodworking tools, and told to get on with it.

With 2 weeks for the project (the most many people will be able to take off work) and 71 miles to build, that's how life is, but then you didn't believe all those projects on Top Gear were carried out the way it appeared on screen did you?

As ever with this type of show, there's a lot of human interest stuff and we got to know a few of the personalities wearing hi-viz. There were emotional back-stories of course, TV loves a little bit of a blubber, but also people showing skill and determination. You could see the teams starting to gel as they fought the elements and landscape. We were encouraged to care about them and I think we generally did. OK, some people come out of the edit better than others, but you could see the hard work involved and the frustrations, and competitive spirit, along the way.

A few justified more depth and we got it. There's not time in 5 shows for everyone to be profiled, but those that were came across as nice, normal(ish - we are talking about people like me who love railways after all) folk you'd be happy to have a pint with.

A few of the enthusiast community have taken against the show. The tone was set by someone posting a rant around 10 minutes in to the first episode which included criticism that those taking part were only looking for their 15 minutes of fame. Since he posted this on several forums, one might suggest he just wanted to shout, "Look at me! Look at me! I don't like something!!!"

Others have suggested it just reinforces all the old railway modeller stereotypes. I disagree.

For a start, the participants were much younger and of more mixed genders than a random selection from any model railway or engineering show. They also represent a wide range of disciplines from railway modellers to real engineers.

If stereotypes are to be found, it's in my view, the behaviour of those on-line. Many couldn't understand the idea of entertainment. Tantrums (some very serious) and abuse were thrown around. One group lost its Facebook moderator due to the grief dished out trying to keep discussions polite. That's not the fault of a TV programme, it's the immaturity and general appalling behaviour of a tiny number of enthusiasts.

Many can't stand the idea of people who aren't time-served modellers doing something in a hobby they feel very protective of. Railway modelling has provided a "home" to people on the autistic spectrum (which in itself is an excellent thing as we saw in the final show) but that makes some nervous of anyone new getting involved in "their" world and sometimes they can lash out on forums and communicate their thoughts very badly.

That said, some people are just very unpleasant, one forumite seemed to have a chip on his shoulder about girls and project managers generally. They weren't going to like it. They weren't going to like anything. The only reason they watched was to be offended. A 5 part series covering the development of a P4 wheel would be more their cup of tea - but this isn't the Open University.

A few chose to ride their personal hobbyhorses, mostly around the H&S arena. Yes, they all wore hi-viz and yes, there were lifejackets when they were anywhere near a canal, but if you had a lot of money invested in a TV series, you'd do your level best not to ruin it by killing off a participant. Also, that orange stuff comes in waterproof and probably midgeproof - both pretty useful in the highlands.

Interestingly, RMweb scored well for sensible discussion. There were participants on the forum who could explain why certain decisions had been taken and point out life is a lot harder on the ground than sat in front of a screen hundreds of miles away. This made for interesting discussion which I felt added to the show.

Those who took part seemed to have enjoyed themselves and are rightly proud of what they achieved. Like any project, not everything went well. Sometimes this made good TV - refilling the gas on a loco when the burner is still lit looks impressive but isn't actually going to do any damage. It's an easy beginner mistake too, and many of the drivers had never handled a live steam loco before.

Talking about the loco, what a star. One machine ran (nearly all) the length of the line. It needed maintenance along the way, but nothing too major (more on this in the March GR) and is a testament to Roundhouse Engineering. I hope they sell many off the back of it - I know other large-scale traders have already felt the benefit.

Ultimately, I enjoyed it, and so did several million other people. It was obviously a heck of a journey for the participants, but they did it and made many friends along the way.

Well done all concerned. What's next?

Ugears miniatures

$
0
0
Ugears key fobs

The LondonToy Fair usually sees me leave with an SD card full of photos, a bill for a stupidly expensive sandwich, and very little else. 

Not this year. The kind people on the Ugears stand gave me a freebie - 4 tiny kits to make up. 

Parts for each are pushed out of the laser-cut fret and slotted together with the aid of toothpicks used as axles. Each model is a key fob or Christmas tree bauble. Inside the shape are a couple of gears that can be spun. 

Assembly takes a few minutes, most of which is spent sanding the trimmed down axles nice and flush for a neat finish.


Warehouse Wednesday: Back to some wiggly tin

$
0
0
Tin garage 1

Back in 2015, I looked at a corrugated iron garage disappearing under a tree. The tantalising view each time I passed by made me want to know more.

Well, now I can. A couple of months ago, the undergrowth was hacked away and the building now stands proud. The trouble is, it's a great view, but normally impossible to photograph.

Unless you go early when there is so little traffic you can pull up and nip out for a couple of quick snaps. I didn't even bother to aim properly, hoping I could crop down enough for a decent picture.

Tin garage 2

The results, thanks to some Photoshop work on the shadows, look OK. 

I suspect the garage belongs to the house on the other side of the road. In fact, there appears to be an allotment or even smallholding of some kind under all the trees. Why they have gone we will doubtless find out eventually, but for the moment, the buildings can enjoy their days in the sun again. 

DB Models, Bourne

$
0
0

Considering that Bourne and its surrounding area are home to 3 of the 4 main model railway magazines in the UK, it's amazing that there has been a dearth of model shops until very recently. Desperate builders for magazine projects need somewhere to go, and the chances of some useful publicity must be higher there than anywhere else.

Anyway, DB Models are making the move from an eBay only store selling second hand to a proper shop in an industrial unit selling new products.

Although still setting up during my visit, there were all the usual paints and glues you'd expect, soon to be joined by Railmatch and Precision ranges. All the RTR manufacturers are stocked as well as the Peco range. It's a good sizedshop with lots of very browsable products. 

There will be second hand too, and a nice new shiny website. For the moment though head to the eBay store.

I know I'll be making a few detours on my way back from the office in future...
Viewing all 4473 articles
Browse latest View live


<script src="https://jsc.adskeeper.com/r/s/rssing.com.1596347.js" async> </script>